For Audi cars MMI 2G that don’t have AMI or TV tuner to have audio input, there’s inexpensive device CD Auxiliary optical box to add a CD auxiliary audio input which can be used to stream Bluetooth Audio with smart phones. Quite inexpensive and work perfectly plug and play. All we need is the Bluetooth […]
, now @131k miles, the left side… I refused to use VCDS to see what’s wrong because it would list things that don’t break. – Since it has a slow leak over night, I raised the car to LIFT mode, the pump still worked and brought it to LIFT. – I put it in Jack Mode […]
So, finally I got the system to work with Apple CarPlay and Android Auto perfectly with . Thanks to , showed me how to do it with the that enable the touchscreen module. For people who don’t want to mess around with Android Coding, just download the and run it with the hid-multitouch.ko. Components I’ve […]
If you own a newer Audi (2004+), you may have option called MMI (Multi Media Interface) which control all your media player and display on your dash 7″ screen. Some are built-in the dash or flip up like the A8 D3. The MMI is actually a very simple system, but quite confusing for […]
For those who have older Audi with AMI (Audi Music Interface) unit installed, we tend to get stuck with a 30-pin iPod and iPhone original AMI cables. There are many part numbers for each type and year of the car, but by playing and modifying AMI cables, I found out that they’re basically the same, […]
VW and Audi use the same type of AMI cable to connect to the AMI system. I have a 2015 VW eGolf and I modified the cable to connect a 64GB flash drive with MP3 files. It works quite well. We need to connect 4 USB pins to a USB host cable – PINS 17 […]
For Audi MMI 2G that don’t have FBAS (RVC) installed, you need to add the circuit or change the MMI head unit from for the TV tuner to work. 2007+ A8s and Q7 have back up camera built in therefore it’s plug and play. To upgrade 4E0 035 729 A you also need the […]
Audi MMI 2G & 3G MOST bus is very simple but yet very hard to diagnose which components connected to the bus is faulty due to the serial optical connections. If the system is not thoroughly tested and diagnosed, many good parts can be replaced in the process. This is a simple test just show that an open […]
